CISCO888-K9

Communications




Protocols & Specifications:
ITU G.991.2 (G.shdsl)


Type:
DSL modem






Dimensions & Weight




Depth:
24.9 cm


Height:
4.4 cm


Weight:
2.5 kg


Width:
32.5 cm






Environmental Parameters




Humidity Range Operating:
10 - 85% (non-condensing)


Max Operating Temperature:
40 C


Min Operating Temperature:
0 C






Expansion / Connectivity




Interfaces:
LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x SHDSL ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST - RJ-45






General




Authentication Method:
RADIUS, TACACS+


Capacity:
IPSec VPN tunnels: 20


Compliant Standards:
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN55022 Class B, ICES-003 Class B, EN 61000-6-1, AS/NZ 3548 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, EN 300 386


Connectivity Technology:
Wired


Data Link Protocol:
Ethernet, Fast Ethernet


Device Type:
Router - 4-port switch (integrated)


Enclosure Type:
Desktop


Encryption Algorithm:
LEAP, DES, Triple DES, SSL, PEAP, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES


Features:
NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD)


Flash Memory:
128 MB


Network / Transport Protocol:
L2TP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS


RAM:
256 MB (installed) / 768 MB (max)


Remote Management Protocol:
Telnet, SNMP 3, HTTP, HTTPS, SSH


Routing Protocol:
OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE


Status Indicators:
Port status, power






Power




Power Device:
External power adapter - 60 Watt


Voltage Required:
AC 120/230 V (50/60 Hz)






Software / System Requirements




OS Provided:
Cisco IOS Advanced Security