CISCO887W-GN-E-K9

Aerial




Aerial:
External detachable


Antenna Qty:
3


Directivity:
Omni-directional


Gain Level:
2 dBi






Communications




Digital Signaling Protocol:
ADSL2+


Protocols & Specifications:
ITU G.992.1 (G.DMT) Annex A, ITU G.992.3 Annex A, ITU G.992.5 Annex A


Type:
ISDN / DSL modem combo






Dimensions & Weight




Depth:
26.4 cm


Height:
4.4 cm


Weight:
2.5 kg


Width:
32.5 cm






Environmental Parameters




Humidity Range Operating:
10 - 85%


Max Operating Temperature:
40 C


Min Operating Temperature:
0 C






Expansion / Connectivity




Expansion Slots:
1 (total) / 1 (free) x ExpressCard ¦ 1 (total) / 1 (free) x SO-DIMM 200-pin


Interfaces:
LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST






General




Authentication Method:
RADIUS, TACACS+


Capacity:
IPSec VPN tunnels: 20


Compliant Standards:
IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0), VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1


Connectivity Technology:
Wireless, wired


Data Link Protocol:
Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)


Device Type:
Wireless router - 4-port switch (integrated)


Enclosure Type:
Desktop


Encryption Algorithm:
DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES


Features:
Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), MAC address filtering, Broadcast Storm Control, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy


Flash Memory:
128 MB


Frequency Band:
2.4 GHz


Network / Transport Protocol:
L2TP, IPSec, PPPoE, PPPoA


RAM:
256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin


Remote Management Protocol:
Telnet, SNMP 3, HTTP, HTTPS, SSH


Routing Protocol:
RIP-1, RIP-2, HSRP, VRRP, GRE


Status Indicators:
Port status, power






Power




Power Device:
External power adapter - 60 Watt


Voltage Required:
AC 120/230 V (50/60 Hz)






Software / System Requirements




OS Provided:
Cisco IOS Advanced Security